Fortcoat is a strong polymer modified surface dressing emulsion. It utilises the technology of a strong polymer modified bitumen.

Click here for the COSHH sheet

Polbit is a mid polymer modified cationic emulsion, manufactured with a polymer modified bitumen

Click here for the COSHH sheet

Polybond is a high binder polymer modified emulsion. The Vialit pendulum cohesion results conform to a polymer surface dressing emulsion

Click here for the COSHH sheet

Polybond is a high binder polymer modified emulsion. The Vialit pendulum cohesion results conform to a polymer surface dressing emulsion

Polybond is a high binder polymer modified emulsion. The Vialit pendulum cohesion results conform to a polymer surface dressing emulsion

K1-40 is suitable for concrete curing, mist spraying and tack coating. K1-40 is supplied and used at ambient temperatures reducing the risk of heat related injuries to the user.

Click here for the COSHH sheet

K1-60 emulsion has similar uses to that of K1-40 aswell as grouting, patching, sealing, formation and sub-base, and surface dressing

Click here for the COSHH sheet

K1-70 is primarily used for surface dressing applications, however can be used for water proofing and 'retread' applications where the emulsion is used in conjunction with planings/mixed aggregate to produce macadam type material.

Cold Seal Paint has various uses from crack sealing on driveways and pavements to painting on roofs to disallow the penetration of water. The main use for Cold Seal tends to be for sealing the vertical edges in trenches.

Click here for the COSHH sheet

Hot Joint Paint requires heating up in a bitumen boiler. It is primarily used to seal up the edges of freshly laid tarmac.

Click here for the COSHH sheet